PERNİX N550 PROFILE WRAPPING ADHESIVE

Since it is a two-component adhesive, a hardener is added at a rate of 4%. The hardener added to the adhesive should be mixed within an average of 2 minutes without rapid and vigorous stirring. Molecular composition is achieved slowly and by the same principle. The adhesive should be consumed within 8 hours after the hardener is added. Once the adhesive is prepared, it is emptied into the glue tank of the profile coating machine. The adhesive is applied to the foil surface. The heat of the evaporation tunnel in the coating machine should be around 55-65 °C in the exhaust fan chamber. After the fan chamber exit, the activation process should be provided with an infrared heater.

25 Kg - 250 Kg - 1 Kg Hardener 10 Kg Hardener